Share Email Print
cover

Proceedings Paper

Performance of the Hampshire Instruments Model 5000 proximity x-ray stepper
Author(s): John Frackoviak; George K. Celler; Charles W. Jurgensen; R. R. Kola; Anthony E. Novembre; Lee E. Trimble; David N. Tomes
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The Hampshire Instruments Model 5000 Stepper is a commercially available laser based 1:1 proximity x-ray stepper. The source of this system is a 25 watt Nd:glass slab laser which is focused to approximately 200 micrometers diameter spot on an iron alloy tape target. Nanosecond pulses fired at a 2 Hz burst (1 Hz average) repetition rate produce slightly more than 1 mJ/cm2 of x-ray flux per pulse at the wafer plane. This flux of soft x-ray has a spectrum of 8 - 20 angstroms centered on the 14 angstroms band. This is the first system shipped by Hampshire Instruments. It is a research and development tool which is not meant for the production line, but rather as a means to investigate issues associated with x-ray lithography and inserting a system of this type into a manufacturing environment. This paper will present final acceptance test results for system resolution, critical dimension control and registration, as well as data showing system performance for the first five months of operation. Results showing 0.2 micrometers line and space resolution across a 14.7 mm field in 1.0 micrometers thick resist printed using a tungsten absorber mask will be presented. Registration test results show a variation of 0.13 micrometers (3 (sigma) ) across a five wafer lot. When the alignment system was slowed down, however, a result of 0.09 micrometers was achieved. Metrology issues dealing with critical dimension control as they pertain to this stepper will be addressed.

Paper Details

Date Published: 24 June 1993
PDF: 15 pages
Proc. SPIE 1924, Electron-Beam, X-Ray, and Ion-Beam Submicrometer Lithographies for Manufacturing III, (24 June 1993); doi: 10.1117/12.146508
Show Author Affiliations
John Frackoviak, AT&T Bell Labs. (United States)
George K. Celler, AT&T Bell Labs. (United States)
Charles W. Jurgensen, AT&T Bell Labs. (United States)
R. R. Kola, AT&T Bell Labs. (United States)
Anthony E. Novembre, AT&T Bell Labs. (United States)
Lee E. Trimble, AT&T Bell Labs. (United States)
David N. Tomes, Hampshire Instruments, Inc. (United States)


Published in SPIE Proceedings Vol. 1924:
Electron-Beam, X-Ray, and Ion-Beam Submicrometer Lithographies for Manufacturing III
David O. Patterson, Editor(s)

© SPIE. Terms of Use
Back to Top