Share Email Print
cover

Proceedings Paper

Thermal test results of the JET divertor plates
Author(s): Hans Dieter Falter; H. Altmann; Chandrakant B. Baxi; G. H. Deschamps; R. S. Hemsworth; D. Martin; P. Massmann
Format Member Price Non-Member Price
PDF $14.40 $18.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The actively cooled version of the JET diverter plates use a finned structure as a heat exchange surface between the copper alloy base plate and the cooling water (hypervapotron). The turbulence created by the fin structure gives a remarkably good heat transfer even before the onset of boiling. The boiling heat transfer is stabilized by the colder fin structure. Finite element calculations confirm that the heat transfer can be explained by turbulent boiling heat transfer. Power densities of up to 25 MW/m2 can be removed with a pressure drop of 4 bar per meter. Beryllium tiles brazed to the CuCrZr base plate can withstand a pulsed power loading of up to 16 MW/m2. Limited in strength is the intermetallic layer between the braze and the beryllium tile. The test sections, mounted rigidly against a strong back, withstood the stress caused by thermal expansion.

Paper Details

Date Published: 25 February 1993
PDF: 11 pages
Proc. SPIE 1739, High Heat Flux Engineering, (25 February 1993); doi: 10.1117/12.140493
Show Author Affiliations
Hans Dieter Falter, JET Joint Undertaking (United Kingdom)
H. Altmann, JET Joint Undertaking (United Kingdom)
Chandrakant B. Baxi, General Atomics (United States)
G. H. Deschamps, JET Joint Undertaking (United Kingdom)
R. S. Hemsworth, DFRC Tore Supra, CEN Cadarache (France)
D. Martin, JET Joint Undertaking (United Kingdom)
P. Massmann, JET Joint Undertaking (United Kingdom)


Published in SPIE Proceedings Vol. 1739:
High Heat Flux Engineering
Ali M. Khounsary, Editor(s)

© SPIE. Terms of Use
Back to Top