Share Email Print
cover

Proceedings Paper

Flexible storage medium for write-once optical tape
Author(s): Andrew J.G. Strandjord; Steven P. Webb; Donald J. Perettie; Robert A. Cipriano
Format Member Price Non-Member Price
PDF $14.40 $18.00

Paper Abstract

A write-once data storage media has been developed which is suitable for optical tape applications. The media is manufactured using a continuous film process to deposit a ternary alloy of tin, bismuth, and copper. This laser sensitive layer is sputter deposited onto commercial plastic web as a single-layer thin film. A second layer is sequentially deposited on top of the alloy to enhance the media performance and act as an abrasion resistant hard overcoat. The media was observed to have laser write sensitivities of less than 2.0 njoules/bit, carrier-to-noise levels of greater than 50 dBs, modulation depths of approximately 100%, read-margins of greater than 35, uniform grain sizes of less than 200 angstroms, and a media lifetime that exceeds 10 years. Prototype tape media was produced for use in the CREO drive system. The active and overcoat materials are first sputter deposited onto three mil PET film in a single pass through the vacuum coating system, and then converted down into multiple reels of 35 mm X 880 m tape. One mil PET film was also coated in this manner and then slit and packaged into 3480 tape cartridges.

Paper Details

Date Published: 13 August 1992
PDF: 10 pages
Proc. SPIE 1663, Optical Data Storage, (13 August 1992); doi: 10.1117/12.137567
Show Author Affiliations
Andrew J.G. Strandjord, Dow Chemical Co. (United States)
Steven P. Webb, Dow Chemical Co. (United States)
Donald J. Perettie, Dow Chemical Co. (United States)
Robert A. Cipriano, Dow Chemical Co. (United States)


Published in SPIE Proceedings Vol. 1663:
Optical Data Storage
Donald B. Carlin; David B. Kay; Alfred A. Franken, Editor(s)

© SPIE. Terms of Use
Back to Top