Share Email Print
cover

Journal of Electronic Imaging

Fiber optic attenuator
Author(s): Arto Karppinen; Harri K. Kopola; Risto A. Myllylae
Format Member Price Non-Member Price
PDF $20.00 $25.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Several possibilities based on the principles of scattering and polarization of light in liquid crystals (LCs) and PLZT ceramics were studied for the replacement of mechanical shutters and attenuators in optical instruments. A scatter-mode LC was selected as the active material, and two modules were developed for fiber optic attenuator applications. In the first, the light transmitted through an optical fiber (input fiber, Φ100/140 μm) is collimated to a beam using a graded-index microlens (0.25 P, Φ1.8 mm). This beam penetrates two LC films (7 × 12 mm2) and is received by a microlens at the output fiber. The second, for large-diameter fibers (Φ400 μm), employs conventional aspherical lenses to optimize the fiber-to-fiber coupling instead of microlenses. Components were built for both Φ100- and Φ400-μm fibers. The maximum transmission is up to 70% and maximum contrasts 10,000:1 (632.8 nm), 2000:1 (830 nm), and 700:1 (905 nm). The rise time is typically less than 1 ms and the decay time less than 5 ms, given a temperature above + 20°C. The contrast remains high from 0 to + 50°C. Both components function with ±100VAC.

Paper Details

Date Published: 1 January 1992
PDF: 7 pages
J. Electron. Imaging. 1(1) doi: 10.1117/12.55181
Published in: Journal of Electronic Imaging Volume 1, Issue 1
Show Author Affiliations
Arto Karppinen, Univ. of Oulu (Finland)
Harri K. Kopola, Univ. of Oulu (Finland)
Risto A. Myllylae, Technical Research Ctr. of Finland (Finland)


© SPIE. Terms of Use
Back to Top