Share Email Print
cover

Optical Engineering

Low-coherence interferometer for contact lens surface metrology
Author(s): Kyle C. Heideman; John E. Greivenkamp
Format Member Price Non-Member Price
PDF $20.00 $25.00

Paper Abstract

Contact lens performance depends on a number of lens properties. Many metrology systems have been developed to measure different aspects of a contact lens, but none test the surface figure in reflection to subwavelength accuracy. Interferometric surface metrology of immersed contact lenses is complicated by the close proximity of the surfaces, low surface reflectivity, and instability of the lens. An interferometer to address these issues was developed and is described here. The accuracy of the system is verified by comparison of glass reference sample measurements against a calibrated commercial interferometer. The described interferometer can accurately reconstruct large surface departures from spherical with reverse raytracing. The system is shown to have residual errors better than 0.05% of the measured surface departure for high slope regions. Measurements made near null are accurate to λ/20. Spherical, toric, and bifocal soft contact lenses have been measured by this system and show characteristics of contact lenses not seen in transmission testing. The measurements were used to simulate a transmission map that matches an actual transmission test of the contact lens to λ/18.

Paper Details

Date Published: 29 March 2016
PDF: 12 pages
Opt. Eng. 55(3) 034106 doi: 10.1117/1.OE.55.3.034106
Published in: Optical Engineering Volume 55, Issue 3
Show Author Affiliations
Kyle C. Heideman, Raytheon Space and Airborne Systems (United States)
John E. Greivenkamp, College of Optical Sciences, The Univ. of Arizona (United States)


© SPIE. Terms of Use
Back to Top