Share Email Print
cover

Optical Engineering

Performance analysis of dynamic erbium-doped fiber amplifier simulator
Author(s): Sharbani Roy; Vishnu Priye; Santosh Kumar
Format Member Price Non-Member Price
PDF $20.00 $25.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

A real time multichannel dynamic erbium doped fiber amplifier (EDFA) Simulink model with flat gain and gain clamping facility has been developed on a MATLAB platform. We model the EDFA simulator with one-dimensional nonlinear differential equation that describes the time dependent population density. For the model to show gain flattening multiplexed channels at different wavelengths, the MATLAB function block is used. Next, to simulate the noise performance of EDFA. New forward amplified spontaneous emission (ASE) noise blocks are designed that add noise dynamically at signal wavelength. The model has been implemented in the study of performance characteristics of an EDFA in both C - and L -band signal amplification by simulation. Based on the designed ASE generator, noise figure for different signal wavelengths are calculated. For 980 nm pump power, the noise figure almost reaches the practical limit of 3 dB whereas for 1480 nm pump power, a variation of about 1.5 dB and 0.8 dB is observed from the practical limit for the C - and L -bands, respectively. The present model can be implemented successfully as a test bed in the study of EDFA gain dynamics over the entire third optical communication bandwidth (1525 to 1690 nm) in signal amplification.

Paper Details

Date Published: 24 April 2013
PDF: 12 pages
Opt. Eng. 52(4) 045009 doi: 10.1117/1.OE.52.4.045009
Published in: Optical Engineering Volume 52, Issue 4
Show Author Affiliations
Sharbani Roy, Indian School of Mines (India)
Vishnu Priye, Indian School of Mines (India)
Santosh Kumar, Indian School of Mines (India)


© SPIE. Terms of Use
Back to Top