Share Email Print

Journal of Micro/Nanolithography, MEMS, and MOEMS

Influence of pulsed Nd3+ : YAG laser beam profile and wavelength on microscribing of copper and aluminum thin films
Author(s): Srinagalakshmi Nammi; Nilesh J. Vasa; G. Balaganesan; Sanjay Gupta; Anil C. Mathur
Format Member Price Non-Member Price
PDF $20.00 $25.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Evenly spaced conductive grids of copper and aluminum thin films on polyimide substrate are used for parabolic reflector antennas aboard telecommunications satellites. Laser microscribing of thin films using a flat-top and Gaussian laser beam profile is analyzed with 95% overlapping of the diameter of the laser spot. Laser scribing is performed using the Q-switched Nd3+:  YAG (355, 532 nm) laser. The influence of laser irradiation and beam shape on the scribed microchannel width, depth, and surface characteristics is experimentally analyzed using a noncontact optical profilometer and scanning electron microscope (SEM). Laser scribing using a flat-top profile produced near rectangular microchannels in copper thin films. Using the Gaussian profile, the probability of melting is greater than vaporization as observed using SEM images; this melt pool plays a prominent role in resolidification at the edges. The depth of the scribe channel is observed to be 20% higher for the 532-nm wavelength compared to the 355-nm wavelength. The effect of different environments such as air, water, and vacuum on the channel depth and quality is reported. The response of aluminum and copper thin films for high fluences is also studied. Thermal modeling of the laser-material interaction has been attempted by assuming the plasma electron temperature as the laser ablation temperature for modeling the recession rate and depth for a single laser pulse. Model results agree with experimental data showing greater depth for 532 nm compared to 355 nm.

Paper Details

Date Published: 23 October 2015
PDF: 7 pages
J. Micro/Nanolith. 14(4) 044503 doi: 10.1117/1.JMM.14.4.044503
Published in: Journal of Micro/Nanolithography, MEMS, and MOEMS Volume 14, Issue 4
Show Author Affiliations
Srinagalakshmi Nammi, Indian Institute of Technology Madras (India)
Nilesh J. Vasa, Indian Institute of Technology Madras (India)
G. Balaganesan, Indian Institute of Technology Madras (India)
Sanjay Gupta, Indian Space Research Organisation (India)
Anil C. Mathur, Indian Space Research Organisation (India)

© SPIE. Terms of Use
Back to Top