Share Email Print
cover

Journal of Micro/Nanolithography, MEMS, and MOEMS

Study of device mass production capability of the character projection based electron beam direct writing process technology toward 14 nm node and beyond
Author(s): Yoshinori Kojima; Yasushi Takahashi; Masaki Takakuwa; Shuzo Ohshio; Shinji Sugatani; Ryo Tsujimura; Hiroshi Takita; Kozo Ogino; Hiromi Hoshino; Yoshio Ito; Masaaki Miyajima; Jun-ichi Kon
Format Member Price Non-Member Price
PDF $20.00 $25.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Techniques to appropriately control the key factors for a character projection (CP) based electron beam direct writing technology for mass production are shown and discussed. In order to achieve accurate CD control, the CP technique using the master CP is adopted. Another CP technique, the Packed CP, is used to obtain suitable shot count. For the alignment on the some critical layers which normally have an even surface, the process removing SiO2 material filled in the alignment marks is added and then the alignment marks can be detected using electron beam. The proximity effect correction using the simplified electron energy flux model and the hybrid exposure are used to obtain enough process margins. As a result, the sufficient CD accuracy, overlay accuracy, and yield are obtained on the 65 nm node device. Due to the proper system control, more than 10,000 production wafers have been successfully exposed so far without any major system downtime. It is shown that those techniques can be adapted to the 32 nm node production with slight modifications. It is expected that by using the Multi Column Cell exposure method, those techniques will be applicable to the rapid establishment for the 14 nm node technology.

Paper Details

Date Published: 7 August 2012
PDF: 9 pages
J. Micro/Nanolith. 11(3) 031403 doi: 10.1117/1.JMM.11.3.031403
Published in: Journal of Micro/Nanolithography, MEMS, and MOEMS Volume 11, Issue 3
Show Author Affiliations
Yoshinori Kojima, e-Shuttle Inc. (Japan)
Yasushi Takahashi, e-Shuttle Inc. (Japan)
Masaki Takakuwa, e-Shuttle Inc. (Japan)
Shuzo Ohshio, e-Shuttle Inc. (Japan)
Shinji Sugatani, e-Shuttle, Inc. (Japan)
Ryo Tsujimura, Fujitsu Labs. (Japan)
Hiroshi Takita, Fujitsu Semiconductor Ltd. (Japan)
Kozo Ogino, Fujitsu Semiconductor Ltd. (Japan)
Hiromi Hoshino, Fujitsu Semiconductor Ltd. (Japan)
Yoshio Ito, Fujitsu Ltd. (Japan)
Masaaki Miyajima, Fujitsu VLSI Ltd. (Japan)
Jun-ichi Kon, Fujitsu Labs., Ltd. (Japan)


© SPIE. Terms of Use
Back to Top