Share Email Print

Journal of Micro/Nanolithography, MEMS, and MOEMS

Accurate measurement of very small line patterns in critical dimension scanning electron microscopy using model-based library matching technique
Author(s): Chie Shishido; Maki Tanaka; Mayuka Osaki
Format Member Price Non-Member Price
PDF $20.00 $25.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Our purpose is to reduce the critical dimension (CD) bias for very small patterns with line widths of <15 nm. The model-based library (MBL) method, which estimates the dimensions and shape of a target pattern by comparing a measured scanning electron microscopy image waveform with a library of simulated waveforms, was modified in two ways. The first modification was the introduction of line-width variation into the library to overcome problems caused by significant changes in waveform due to changes in both sidewall shape and line width. The second modification was the fixation of MBL tool parameters to overcome problems caused by the reduction in pattern shape information due to merging of right and left white bands. We verified the effectiveness of the modified MBL method by applying it to actual silicon patterns with line widths in the range 10-30 nm. The CD bias measured by MBL method for three heights (20, 50, and 80%) was consistent with the atomic force microscopy results. The CD biases at all heights were <0.5 nm, and the slopes of the CD biases with respect to the CD were <3%.

Paper Details

Date Published: 1 January 2011
PDF: 10 pages
J. Micro/Nanolith. MEMS MOEMS 10(1) 013010 doi: 10.1117/1.3541780
Published in: Journal of Micro/Nanolithography, MEMS, and MOEMS Volume 10, Issue 1
Show Author Affiliations
Chie Shishido, Hitachi, Ltd. (Japan)
Maki Tanaka, Hitachi, Ltd. (Japan)
Mayuka Osaki, Hitachi, Ltd. (Japan)

© SPIE. Terms of Use
Back to Top