Share Email Print
cover

Journal of Micro/Nanolithography, MEMS, and MOEMS

Ultralow k1 oxide contact hole formation and metal filling using resist contact hole pattern by double line and space formation method
Author(s): Hiroko Nakamura; Mitsuhiro Omura; Souichi Yamashita; Yasuyuki Taniguchi; Junko Abe; Satoshi Tanaka; Soichi Inoue
Format Member Price Non-Member Price
PDF $20.00 $25.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

It was shown previously that the double line and space formation method (DLFM) is superior to other methods for forming a dense contact hole (C/H) resist pattern by simulation, and a 0.30-k1 1:1 C/H resist pattern was formed experimentally. A through process of C/H formation from resist patterning to metal filling is presented. The oxide square C/Hs transferred from the resist pattern formed by the DLFM could be filled with metal, although the transferred C/Hs had square corners in comparison with the conventional C/H resist patterning. On the other hand, the combination of the DLFM and the “pack and cover process” makes it possible to form resist random C/Hs on grids. So, the possibility of forming random C/Hs filled with metal is shown. Moreover, the resolution limit of the DLFM is discussed. The 0.29-k1 (half pitch 65-nm) and 0.27-k1 (half pitch 56-nm) 1:1 C/H resist patterns could be formed with optimized dipole illumination. So, random C/Hs with k1 below 0.30 are expected to be formed.

Paper Details

Date Published: 1 October 2008
PDF: 7 pages
J. Micro/Nanolith. 7(4) 043001 doi: 10.1117/1.2990735
Published in: Journal of Micro/Nanolithography, MEMS, and MOEMS Volume 7, Issue 4
Show Author Affiliations
Hiroko Nakamura, Toshiba Corp. (Japan)
Mitsuhiro Omura, Toshiba Corp. (Japan)
Souichi Yamashita, Toshiba Corp. (Japan)
Yasuyuki Taniguchi, Toshiba Corp. (Japan)
Junko Abe, Toshiba Corp. (Japan)
Satoshi Tanaka, Toshiba Corp. (Japan)
Soichi Inoue, Toshiba Corp. (Japan)


© SPIE. Terms of Use
Back to Top