Share Email Print

Journal of Micro/Nanolithography, MEMS, and MOEMS

Deep lateral anhydrous HF/methanol etching for MEMS release processes
Author(s): Meltem Erdamar; Karthikeyan Shanmugasundaram; Paul Roman; Paul Mumbauer; Maria Klimkiewicz; Jerzy Ruzyllo
Format Member Price Non-Member Price
PDF $20.00 $25.00

Paper Abstract

As demonstrated earlier, gas-phase etching of sacrificial oxide with a vapor mixture of anhydrous HF (AHF) and methanol (CH3OH) offers a clean, stiction-free, effective etching technique for microelectromechanical systems (MEMS) release. The use of AHF/methanol process in MEMS release operations is explored in the deep lateral etching of patterned silicon-on-insulator (SOI) substrates using a 200 mm multiwafer commercial module, which assures adequate process throughput. It was determined that highly selective, with respect to both Si and Si3N4, etching of SiO2 can be accomplished by controlling pressure and wafer temperature. It was also observed that the vertical etch rates for both the AHF/methanol and the HF: H2O solution was higher than the rates of lateral etches in confined geometries. Furthermore, the AHF/methanol and 1:10 HF: H2O etch chemistries were directly compared in releasing silicon cantilevers up to 500 µm in length and a significantly faster, stiction-free process was observed in the former case. Adequate process reproducibility from wafer to wafer as well uniformity across the wafer was demonstrated.

Paper Details

Date Published: 1 July 2008
PDF: 4 pages
J. Micro/Nanolith. MEMS MOEMS 7(3) 033014 doi: 10.1117/1.2959177
Published in: Journal of Micro/Nanolithography, MEMS, and MOEMS Volume 7, Issue 3
Show Author Affiliations
Meltem Erdamar, The Pennsylvania State Univ. (United States)
Karthikeyan Shanmugasundaram, The Pennsylvania State Univ. (United States)
Paul Roman, Primaxx, Inc. (United States)
Paul Mumbauer, Primaxx, Inc. (United States)
Maria Klimkiewicz, The Pennsylvania State Univ. (United States)
Jerzy Ruzyllo, The Pennsylvania State Univ. (United States)

© SPIE. Terms of Use
Back to Top