Share Email Print
cover

Optical Engineering

Design and manufacture of a lightweight reflective baffle for the BepiColombo Laser Altimeter
Author(s): Karsten Seiferlin; Sumita Chakraborty; Kurt S. Gunderson; Josef Fischer; Benjamin Luthi; Daniele Piazza; Martin Rieder; Martin Sigrist; Nicolas Thomas; Thomas Weigel
Format Member Price Non-Member Price
PDF $20.00 $25.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

The BepiColombo Laser Altimeter (BELA), part of the payload of the European Space Agency's BepiColombo mission, is designed to point a telescope with a 200-mm aperture toward a surface that can reach 700 K. Furthermore, direct sunlight can shine into the instrument at angles of ≥ 38 deg from the boresight. At Mercury, the solar flux can exceed 14 kW m-2. A baffle for such conditions must both reduce straylight to the best possible extent and minimize the heat load to the spacecraft, i.e., the sum of absorbed visible light and infrared flux. We describe the design and manufacture, including coating, of a reflective baffle. The baffle is made by diamond turning of aluminum and has a clear aperture of 200 mm, about 300-mm length, and a mass of 716 g.

Paper Details

Date Published: 1 April 2007
PDF: 11 pages
Opt. Eng. 46(4) 043003 doi: 10.1117/1.2722314
Published in: Optical Engineering Volume 46, Issue 4
Show Author Affiliations
Karsten Seiferlin, Univ. Bern (Switzerland)
Sumita Chakraborty, Univ. Bern (Switzerland)
Kurt S. Gunderson, Univ. Bern (Switzerland)
Josef Fischer, Univ. Bern (Switzerland)
Benjamin Luthi, Univ. Bern (Switzerland)
Daniele Piazza, Univ. Bern (Switzerland)
Martin Rieder, Univ. Bern (Switzerland)
Martin Sigrist, Univ. Bern (Switzerland)
Nicolas Thomas, Univ. Bern (Switzerland)
Thomas Weigel, Oerikon Space (Switzerland)


© SPIE. Terms of Use
Back to Top