Share Email Print
cover

Optical Engineering

Design realization and characterization of a position sensitive detector for fast optical measurement
Author(s): Xun Jun Qu; Bin Lin; Dongyan Chen; Xiangqun Cao; Yu Qing Chen
Format Member Price Non-Member Price
PDF $20.00 $25.00

Paper Abstract

The fabrication and testing results of a 65-pin ceramic packaged 4×4 arrayed position sensitive detector are presented. The detector, consisting of 16 tetra-lateral sensitive areas, is a p-n-n+ configuration made on 3-in. <111> n-type high resistance crystal silicon substrates. A 100-nm antireflection SiO2 thin film is formed on the surface, along with a multilayer cover glass with transmissivity >98% from 400 to 950 nm. Primary tests of the device show that it has a low dark current, high spectral sensitivity, very fast response speed, and very good linearity. The dark current of an element unit is less than 20 nA, which is the allowable maximum dark current. The peak spectral sensitivity of the sensor is over 505 mA/W at 800-nm wavelength. Its response time is 8 ns at 45-V reverse bias and the nonlinearity of the total sensitive area is less than 1%.

Paper Details

Date Published: 1 January 2006
PDF: 5 pages
Opt. Eng. 45(1) 014402 doi: 10.1117/1.2151807
Published in: Optical Engineering Volume 45, Issue 1
Show Author Affiliations
Xun Jun Qu, Zhejiang Univ. (China)
Bin Lin, Zhejiang Univ. (China)
Dongyan Chen, Zhejiang Univ. (China)
Xiangqun Cao, Zhejiang Univ. (China)
Yu Qing Chen, Zhejiang Univ. (China)


© SPIE. Terms of Use
Back to Top