Share Email Print
cover

Journal of Micro/Nanolithography, MEMS, and MOEMS

Nanofabrication with step and flash imprint lithography
Format Member Price Non-Member Price
PDF $20.00 $25.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

Step and flash imprint lithography (SFIL) has made tremendous progress since its initial development at The University of Texas at Austin in the late 1990s. The SFIL process went from laboratory to commercialization in under five years, and the number of technical hurdles that must be cleared before it is recognized as fully competitive with optical or EUV lithography for sub-50-nm patterning is dwindling. Patterning resolution has been demonstrated down to 20 nm, with the limit so far being only the template fabrication process. The SFIL method was developed from the beginning with the precision overlay/alignment requirements of multilevel device fabrication in mind. It was recognized that it would be inherently easier to achieve overlay and alignment accuracy with a constant temperature and low pressure imprinting process, and already tool designers have built on SFIL's advantages to produce tools that are viable for multilayer device fabrication. Early tools have demonstrated better than 10-nm alignment resolution, and no insurmountable fundamental issues have been identified that would prevent alignment resolution from reaching the tight tolerances required for integrated circuit manufacturing. With any contact printing method, process-generated defects are a concern, but the SFIL process has proven to be surprisingly robust with an inherent self-cleaning mechanism for removing particle contamination. Furthermore, new template surface treatments have been developed that improve mold lifetime and minimize defect generation. SFIL shows promise as a low cost manufacturing tool for a wide variety of semiconductor, microelectromechanical, optoelectronic, microfluidic, and other devices. This work summarizes the state of development of step and flash imprint lithography and discusses its potential as a general nanofabrication tool.

Paper Details

Date Published: 1 January 2005
PDF: 6 pages
J. Micro/Nanolith. 4(1) 011002 doi: 10.1117/1.1862650
Published in: Journal of Micro/Nanolithography, MEMS, and MOEMS Volume 4, Issue 1
Show Author Affiliations
Michael D. Stewart, The Univ. of Texas at Austin (United States)
Stephen C. Johnson, The Univ. of Texas at Austin (United States)
Sidlgata V. Sreenivasan, Molecular Imprints, Inc. (United States)
Douglas J. Resnick, Molecular Imprints, Inc. (United States)
Carlton Grant Willson, The Univ. of Texas at Austin (United States)


© SPIE. Terms of Use
Back to Top