Share Email Print

Journal of Micro/Nanolithography, MEMS, and MOEMS

Rigorous simulation of alignment for microlithography
Author(s): Nikolay I. Nikolaev; Andreas Erdmann
Format Member Price Non-Member Price
PDF $20.00 $25.00
cover GOOD NEWS! Your organization subscribes to the SPIE Digital Library. You may be able to download this paper for free. Check Access

Paper Abstract

As the dimensions of semiconductor devices continue to shrink, mask alignment becomes increasingly important and difficult. The required accuracy of alignment is only a few percent of the used wavelengths. In optical projection lithography, the position of a wafer with respect to a mask is determined by the analysis of the light that is diffracted from an alignment mark on the wafer. The profile shape, depth, and asymmetry of the alignment mark significantly affect the observed alignment signal. In order to predict the influence of these factors, the simulation of the alignment system becomes necessary. We compare rigorous methods for the simulation of light diffraction from the alignment mark, such as the finite-difference time-domain method, rigorous coupled wave analysis, and the waveguide method (WG) to the Fresnel method that has been used in the past. It is shown that the three rigorous methods used in this study demonstrate a good convergence. For the specific geometry and material parameters of the alignment mark used in our investigations, WG is most appropriate for fast work. The difference between Fresnel and rigorous methods becomes important when the height of the alignment mark exceeds 30% of the wavelength of the alignment system.

Paper Details

Date Published: 1 July 2003
PDF: 7 pages
J. Micro/Nanolith. MEMS MOEMS 2(3) doi: 10.1117/1.1584685
Published in: Journal of Micro/Nanolithography, MEMS, and MOEMS Volume 2, Issue 3
Show Author Affiliations
Nikolay I. Nikolaev, Fraunhofer Inst for Integrated Sys & Device Tech (Germany)
Andreas Erdmann, Fraunhofer-Institute für Integrierte Sys/Bauelemen (Germany)

© SPIE. Terms of Use
Back to Top