Share Email Print

Spie Press Book

Integrated Optomechanical Analysis, Second Edition
Format Member Price Non-Member Price

Book Description

The development of integrated optomechanical analysis tools has increased significantly over the past decade to address the ever-increasing challenges in optical system design, leveraging advances in computational capability. This book presents not only finite element modeling techniques specific to optical systems but also methods to integrate the thermal and structural response quantities into the optical model for detailed performance predictions.

This edition updates and expands the content in the original SPIE Tutorial Text to include new illustrations and examples, as well as chapters about structural dynamics, mechanical stress, superelements, and the integrated optomechanical analysis of a telescope and a lens assembly.


Book Details

Date Published: 12 November 2012
Pages: 408
ISBN: 9780819492487
Volume: PM223
Errata

Table of Contents
SHOW Table of Contents | HIDE Table of Contents

1. Introduction to Mechanical Analysis Using Finite Elements
1.1 Integrated Optomechanical Analysis Issues
1.1.1 Integration issues
1.1.2 Example: orbiting telescope
1.1.3 Example: lens barrel
1.2 Elasticity Review
1.2.1 Three-dimensional elasticity
1.2.2 Two-dimensional plane stress
1.2.3 Two-dimensional plane strain
1.2.4 Principal stress and equivalent stress
1.3 Materials
1.3.1 Overview
1.3.2 Properties of common materials in optical structures
1.3.2 Figures of Merit
1.3.5 Discussion of materials
1.3.6 Common telescope materials
1.4 Basics of Finite Element Analysis
1.4.1 Finite element theory
1.4.2 Element performance
1.4.3 Structural analysis equations
1.4.4 Thermal analysis with finite elements
1.4.5 Thermal analysis equations
1.5 Symmetry in FE models
1.5.1 General loads
1.5.2 Symmetric loads
1.5.3 Modeling techniques
1.5.4 Axisymmetry
1.5.5 Symmetry: pros and cons
1.6 Model Checkout
1.7 Summary
References
Appendix
A.1 RMS calculations
A.2 Peak-to-Valley
A.3 Orthogonality
A.4 RSS calculations
A.5 Coordinate transformations for vectors
A.6 Coordinate transformations for stress and materials
A.7 Factor of Safety, Margin of Safety, Model Uncertainty Factor

2. Introduction to Optics for Mechanical Engineers
2.1 Electromagnetic Basics
2.2 Polarization
2.3 Rays, Wavefronts, and Wavefront Error
2.4 Optical Aberrations
2.5 Image Quality and Optical Performance
2.5.1 Diffraction
2.5.2 Measures of image blur
2.5.2.1 Spot diagrams
2.5.2.2 Point spread function
2.5.2.3 Encircled energy function
2.5.3 Optical resolution
2.5.4 Modulation transfer function
2.6 Image Formation
2.6.1 Spatial domain
2.6.2 Frequency domain
2.7 Imaging System Fundamentals
2.8 Conic Surfaces
2.9 Mechanical Obscurations
2.9.1 Obscuration periphery, area, and encircled energy
2.9.2 Diffraction effects for various spider configurations
2.9.3 Diffraction spikes
2.10 Optical System Error Budgets

3. Zernike and Other Useful Polynomials
3.1 Zernike Polynomials
3.1.1 Standard Zernike polynomials
3.1.2 Fringe Zernike polynomials
3.1.3 Magnitude and phase
3.1.4 Orthogonality of Zernike polynomials
3.1.4.1 Noncircular apertures
3.1.4.2 Discrete data
3.1.5 Computing the Zernike polynomial coefficients
3.1.5.1 Amplitude normalization
3.1.5.2 Radial normalization
3.1.5.3 Goodness of fit
3.1.5.4 Off-axis optics
3.1.5.5 Singularities
3.2 Annular Zernike Polynomials
3.3 Aspheric and Forbes Polynomials
3.4 X-Y and Legendre Polynomials
3.5 Grazing Incidence Optics
3.5.1 Fourier-Legendre Polynomials
3.5.2 Legendre Polynomials

4. Optical Surface Errors
4.1 Optical Surface Rigid-Body Errors
4.1.1 Computing rigid-body motions
4.1.1.1 Pros/Cons of subtracting RB before poly fit
4.1.1.2 Combining results for segmented optics
4.1.1.3 Transformation to alternate coordinate system
4.1.2 Representing rigid-body motions in the optical model
4.2 Optical-Surface Shape Changes
4.2.1 Surface normal deformations
4.2.1.1 Relating refractive surface errors to wavefront errors
4.2.1.2 Relating reflective surface errors to wavefront errors
4.2.2 Sag deformations
4.2.2.1 Radial Correction
4.2.2.2 Isothermal example
4.2.2.3 Rigid-body motion example
4.3 Optical Surface Deformations and Zernike Polynomials
4.4 Representing Elastic Shape Changes in the Optical Model
4.4.1 Polynomial surface definition
4.4.2 Interferogram files
4.4.3 Uniform arrays of data
4.4.3.1 Grid sag surface
4.4.3.2 Interpolation
4.4.4 Comparison of techniques
4.4.4.1 Accuracy in Optical design codes
4.4.4.2 dz vs dn (fomats, issues) in Optical design codes
4.4.4.3 Residual error and quilting
4.5 Predicting Wavefront Error Using Sensitivity Coefficients
4.5.1 Rigid-body and radius of curvature sensitivity coefficients
4.5.1.1 Computing radius of curvature changes
4.5.2 Use of Zernike sensitivity coefficients
4.6 Finite-Element-Derived Spot Diagrams
4.7 Correlation of Test and Analysis
4.7.1 Interferometer output options
4.7.2 Orientation, order, normalization
4.7.3 Load effects vs Locked-in effects
4.7.4 Example
4.7.4.1 Example
4.8 References

5. Displacement Analysis of Optical Elements
5.1 Displacement Models of Optics
5.1.1 Definitions
5.1.2 Single point models
5.1.3 Solid optics
5.1.3.1 Two-dimensional models
5.1.3.2 Three-dimensional element models
5.1.4 Lightweight mirror models
5.1.4.1 Two-dimensional equivalent-stiffness models
5.1.4.2 Three-dimensional equivalent-stiffness models
5.1.4.3 Three-dimensional plate/shell model
5.1.4.4 Example: comparison of a lightweight mirror models
5.1.4.5 Example: LW mirror with significant quilting
5.1.5 Generation of powered optic models
5.1.5.1 On-axis slumping
5.1.5.2 Off-axis slumping
5.1.5.3 Calculation of local segment sag
5.1.6 Symmetry in Optics
5.1.6.1 Creating symmetric models
5.1.6.2 Example of symmetry verification check
5.2 Displacement Analysis Methods
5.2.1 Analysis of surface effects
5.2.1.1 Composite-plate model
5.2.1.2 Homogeneous-plate model
5.2.1.3 Three-dimensional model
5.2.1.4 Example: coating-cure shrinkage
5.2.1.5 Example: Twyman effect
References

6. Modeling of Mounts and Bonds
6.1 Displacement Models of Adhesive Bonds
6.1.1 Elastic behavior of adhesives
6.1.2 Detailed three-dimensional solid model
6.1.2.1 Conventional models
6.1.2.2 Glued contact models
6.1.3 Equivalent stiffness bond models
6.1.3.1 Effective properties of hockey-puck type bonds
6.1.3.2 Example: modeling of a hockey-puck type bond
6.1.3.3 Effective properties for ring bonds
6.2 Displacement Models of Flexures and Mounts
6.2.1 Classification of structures and mounts
6.2.1.1 Classification of structures
6.2.1.2 Classification of mounts
6.2.1.3 Mounts in 3D space
6.2.2 Modeling of kinematic mounts
6.2.3 Modeling of flexure mounts
6.2.3.1 Arrangement of strut supports
6.2.3.2 Optimal radial location of mounts
6.2.3.3 Modeling of beam flexures
6.2.3.4 Example: modeling of bipod flexures
6.2.3.5 Design issues with bipod flexures
6.2.3.6 Modeling of blade flexures
6.3 Modeling of Test Supports
6.3.1 Modeling of air bags
6.3.2 Example: test support deformation analysis of a nonaxisymmetric optic
6.3.3 Modeling of V-block test supports
6.3.4 Modeling of sling and roller-chain test supports
6.3.5 Comparison of three test supports
6.4 Tolerancing Analysis of Mounts
6.4.1 Monte Carlo analysis
6.4.2 Example: Flatness tolerance of mirror mount
6.5 Analysis of Assembly Processes
6.5.1 Theory
6.5.3 Example: assembly analysis of mirror mounting
References

7. Structural Dynamics and Optics
7.1 Natural Frequencies and Mode Shapes
7.2 Damping
7.3 Frequency Response Analysis
7.3.1 Force excitation
7.3.2 Absolute motion due to base excitation
7.3.3 Relative motion due to base excitation
7.4 Random Vibration
7.4.1 Random vibration in the time domain
7.4.2 Random vibration in the frequency domain
7.4.3 Random vibration SDOF approximations
7.4.4 Random vibration design levels
7.5 Force Limiting
7.6 Vibro-Acoustic Analyses
7.7 Shock Analysis
7.8 Line-of-Sight Jitter
7.8.1 Performing LOS jitter analyses
7.8.2 Cassegrain telescope LOS jitter example
7.8.3 Identifying the critical structural modes
7.8.4 Effects of LOS jitter on Image quality
7.8.4.1 Constant velocity image motion
7.8.4.2 High-frequency sinusoidal image motion
7.8.4.3 Low-frequency sinusoidal image motion
7.8.4.4 Random image motion
7.8.4.5 Impact of sensor integration time
7.9 Active Image Stabilization
7.10 State-Space Matrices
7.11 Multi-Axis Vibration Isolation
7.11.1 Hexapod isolation systems
7.12 Optical Surface Errors due to Dynamic Loads
7.12.1 System wavefront error
References

8. Mechanical Stress and Optics
8.1 Stress Analysis Using FEA
8.1.1 Coarse models
8.1.2 Stress singularities
8.1.3 FEA post-processing
8.2. Analysis of Ductile Materials
8.2.1 Micro-yield
8.2.2 Ultimate strength
8.3 Analysis of brittle materials
8.3.1 Fracture toughness
8.3.2 FEA methods to compute the stress intensity
8.4 Design Strength of Optical Glass
8.4.1 Surface flaws
8.4.2 Controlled polishing and grinding
8.4.3 Inert strength
8.4.3.1 Residual stress and inert strength
8.4.3.2 Inert strength based on Weibull statistics
8.4.3.3 Design strength using Weibull statistics
8.4.3.3.1 Extrapolating test data to components
8.4.3 Environmentally enhanced fracture
8.4.3.1 Crack growth studies
8.4.3.2 Static and dynamic fatigue testing
8.4.3.2.1 Effects of residual stress on the fatigue resistance parameter
8.4.3.3 Lifetime and time-to-failure analyses
8.4.3.4 Lifetime prediction and probability of failure
8.4.3.5 Effects of residual stress on time-to-failure
8.4.4 Proof testing
8.4.5 Cyclic fatigue
8.5 Stress Birefringence
8.5.1 Mechanical stress and the index ellipsoid
8.5.2 Optical errors due to stress birefringence
8.5.3 Stress-optical coefficients
8.5.4 Non-uniform stress distributions
8.5.5 Stress birefringence example
8.5.6 Stress birefringence and optical modeling
References

9. Optothermal Analysis Methods
9.1 Thermal Analysis
9.2 Thermo-Elastic Analysis
9.3.1 CTE temperature dependence
9.3.2 CTE inhomogeneity
9.3 Index of Refraction Changes with Temperature
9.3.1 Sellmeier dispersion equation
9.4 Effects of Temperature on Simple Lens Elements
9.4.1 Focus shift of a doublet lens due to isothermal change
9.4.2 Radial gradients
9.5 Thermal Effects Using Optical Design Software
9.5.1 Representing OPD maps in the optical model
9.6 Thermo-Optic Analysis
9.6.1 Thermo-optic finite element models
9.6.1.1 Multiple reflecting surfaces
9.6.2 Thermo-optic errors using integration techniques
9.6.3 User-defined surfaces and gradients
9.7 Bulk Volumetric Absorption
9.8 Mapping of Temperature Fields from the Thermal Model to the Structural Model
9.8.1 Nearest-node methods
9.8.2 Conduction analysis
9.8.3 Shape function interpolation
9.9 Analogous Techniques
9.9.1 Moisture absorption
9.9.2 Adhesive curing
References

10. Adaptive Optics Analysis Methods
10.1 Introduction
10.2 Method of Simulation
10.2.1 Determination of actuator inputs
10.2.2 Characterization metrics of adaptive optics
10.2.2.1 Example: Adaptive control simulation of a mirror segment
10.2.3 Practical implementation
10.2.3.1 Augment actuators
10.2.3.2 Example of augment actuators
10.2.3.3 Slope control
10.2.3.4 Actuator failure
10.2.3.5 Actuator stroke limits
10.2.3.6 Actuator resolution and tolerancing
10.2.3.7 Example of actuator resolution analysis
10.3 Design Optimization of Adaptively Controlled Optics
10.3.1 Adaptive control simulation in design optimization
10.3.1.1 Example: Structural design optimization of an adaptively controlled optic
10.3.2 Actuator placement optimization
10.3.2.1 Example: actuator layout optimization of a grazing incidence optic
10.5 Stressed-Optic Polishing
10.5.1 Adaptive control simulation in stressed-optic polishing
10.5.2 Example: stressed-optic polishing of hexagonal array optics
10.6 Analogies Solved via Adaptive Tools
10.6.1 Correlation of CTE variation
10.6.2 Mount distortion
References

11. Optimization of Optomechanical Systems
11.1 Overview
11.2 Optimization Theory
11.3 Structural Optimization of Optical Performance
11.3.1 Use of design response equations in the FE model
11.3.2 Use of external design responses in FEA
11.4 Integrated Thermal-Structural-Optical Optimization
References

12. Superelements in Optics
12.1 Background
12.2 Superelement Theory
12.2.1 Static analysis
12.2.2 Dynamic analysis
12.2.2.1 Guyan reduction
12.2.2.2 Component mode synthesis
12.2.3 Types of superelements
12.2.3.1 Conventional SE
12.2.3.2 External SE
12.3 Application to Optics
12.3.1 Kinematic mounts
12.3.2 Segmented optics
12.4 Advantages of Superelements
12.5 Telescope Example
References

13. Integrated Optomechanical Analysis of a Telescope
13.1 Overview
13.2 Optical Model Description
13.3 Structural Model Description
13.4 Optimizing the PM with Optical Measures
13.5 Line-of-Sight Calculations
13.6 On-Orbit Image Motion Random Response
13.7 Detailed Primary Mirror Model
13.8 RTV vs Epoxy Bond
13.9 Gravity Static Performance
13.10 Thermoelastic performance
13.11 Polynomial coefficients
13.12 Assembly Analysis
13.13 Other Analyses
13.14 Superelements
References

14. Integrated Optomechanical Analysis of a Lens Assembly
14.1 Double Gauss Lens Assembly
14.1.2 Steady-state thermal analysis
14.1.3 Thermo-elastic analysis
14.1.4 Stress birefringence analysis
14.1.5 Thermo-optic analysis
14.1.6 Optical performance versus thermal loading



© SPIE. Terms of Use
Back to Top